A:Free provision: project feasibility analysis + case study of similar areas.

Q:Can aluminum Composite panels be installed on complex curved facades? How can precision be ensured?

A:Customizable implementation, technical solutions include: • 3D laser scanning + BIM modeling: accurately obtain wall surface data, prefabricate irregular panels; • Adjustable transition system: uses universal angle codes and three-dimensional adjustable trusses, allowing for ±15mm correction; • Segmented tight fitting process: decomposes curved surfaces into multiple linear planes, minimizing fitting errors. We provide on-site surveying and surface deepening design services.

Q:How do ultra-high-rise buildings address the wind pressure resistance issues of aluminum composite panels alucobond ?

A:Core technical countermeasures: 1. Mechanical verification: Calculate the thickness of the panels and the density of attachment points based on the local wind pressure value for a once-in-50-years event (e.g., ≥1.5 kN/㎡). 2. Enhanced anchorage: Use a combination of back bolts and mechanical hangers for dual fixation (at least 6 attachment points per panel). 3. Wind tunnel depressurization design: Install hidden air channels within the panel joints to balance internal and external air pressure. The team includes structural engineers who can provide wind pressure calculation reports and seismic resistance reports.

Q:How can installations be made without demolishing old walls during the renovation of existing buildings?

A:Innovative solutions: • Dry construction method: New base layer constructed using light steel keel framework (80-150mm away from the original wall) to avoid issues related to the flatness of the old walls; • Non-destructive anchoring: Use of chemical anchors to penetrate the insulation layer and reach the structural layer, preventing vibration-induced cracking; • Quick plug-and-play system: Pre-installed clips on panels increase on-site assembly efficiency by 50%. Successfully completed 17 renovation projects, with the fastest completion time being 15 days for a 1000 square meter project.

Q:How to prevent condensation on aluminum composite panels alucobond due to cold bridging in cold regions?

A:Custom thermal break technology: Technical solutions 1. Thermal break profile system → The profiles incorporate PA66 nylon thermal break strips with a thermal conductivity of ≤0.3 W/(m·K). 2. Layered sealing structure → Closed-cell foam rods are filled within the panel joints, covered externally by elastic sealant. 3. Condensate drainage → Water channels are set on the back of the profiles, connecting to vertical drainage ducts. * Can provide thermal simulation reports and dedicated accessory packages for projects below -30°C.

Mō Kaupapa Hangarau Tohunga Rongoa-konumohe papa hiato-konumohe papa mata-te tuanui parapara konumohe

Mō Kaupapa Hangarau Tohutohu Rongoa

About Project Technical Consultancy Solutions

Kaupapa & Tautoko Hangarau Whakapa atu inaianei

1.Ratonga

1.1 Nga otinga kaupapa

He kaha te kaiwhakarato ki te mahi i roto i nga kaupapa miihini a nga kaihoko ngaio, penei i nga kaikirimana, i nga kamupene hoahoa ranei

1.2 Te kaha hoahoa kaupapa

Ka taea e te kaiwhakarato te whakarato ratonga hoahoa 2D me te 3D mo nga kaihoko miihini

1.3 Te whakaurunga i runga i te pae

Ka taea e te kaiwhakarato te whakarato ratonga whai-a-papa mo nga kaihoko miihini

1.4 Tautoko hangarau i runga i te waahi

Ka taea e te kaiwhakarato te tuku miihini mo te tautoko ratonga rohe

1.5 Te hoko kotahi-mutu

Ka taea e te kaiwhakarato te whakarato ratonga hoahoa kōpaki hua-maha

2.Mana kounga

2.1 Wātea te pūtāhui

Ka whakaratohia e te kaiwhakarato nga ratonga whakapumautanga kounga

2.2 Te whaiwhai kounga

Ka tautokohia nga kaihoko ki te whai kounga

2.3 Nga taputapu whakamatautau

Te maha o nga taputapu whakamatautau hua a te kaiwhakarato

2.4 Te tirotiro rauemi i runga i te waahi

Ko te kaiwhakarato he tukanga tirotiro e tika ana mo nga rauemi mata o tenei hua

2.5 Te tautuhi i te whaiwhainga rawa-mata

Ka tautokohia nga kaihoko ki te whai kounga

2.6 Kua oti te tirotiro hua

Ka whakahaerehia e te kaiwhakarato nga tirotirohanga mo ana hua kua oti katoa

2.7 Kaitirotiro QA/QC

Te maha o nga kaimahi tirotiro QA/QC a te kaiwhakarato

3.Tiwhikete

Tiwhikete ISO9001

Tiwhikete SGS

Tiwhikete FR SGS

Kei te pirangi koe ki te kite i tenei whakaotinga e whakamahia ana ki runga i te mata?

Te uru ki ta maatau simulator facade

He kaupapa kua oti ranei te Inspiration?

Rapua he Proiect & Taupānga

Nga korero e pa ana

Photosynthetic Aluminum Facade Cladding Panel: Generating Building Energy

Nov. 09, 2025

Te Paewhiri Whakaata Konumohe Facade: Te Hanga Hangahanga Hanga

I roto i te tipu o te whenua o te hoahoanga me te hoahoa tauwhiro, kei te whai pakiaka tetahi tauira hou

Tiro atu

Cleaning and Maintaining PVDF ACP Surfaces

Akuhata 22, 2025

Te horoi me te pupuri i nga mata PVDF ACP

Neke atu i te rua tekau tau, kua huri nga whenua hoahoanga puta noa i te ao e te kikorangi, te roa.

Tiro atu

Noema 15, 2025

Pe ACP Taputapu Taputapu Thermal

I roto i te mara o nga rawa o te whare-kaha, pe ACP (Plyethylene konumohe pa

Tiro atu

The Science Behind White Core A2 Fireproof Anodized Aluminum Composite Panels

Hurae 15, 2025

Te Pūtaiao kei muri White Core A2 Fireproof Anodized Aluminum Composite Panels

I nga ra e whai ake nei, ko A2, B1, me B2 kei te mahi katoa. Ko te hunga whai ota auau ka taea te whakapā atu ki a Whatsapp mo te tuku.

Tiro atu

Dec. 28, 2025

Aluminum Ceiling Grid For Practical Modern Spaces

Aluminum ceiling systems are becoming a popular choice in everyday buildings because they are safe,

Tiro atu

Dec. 28, 2025

PVDF Aluminum Composite Panel For Long-Lasting Facades

PVDF aluminum composite panel products are widely used in modern buildings because they are durable,

Tiro atu

	Te miihini o nga panui hiato
	Ka taea te mahi miihini konumohe ma te whakamahi i nga miihini CNC
	ā-ringa rānei me te kani pakitara, te pouara kawe ranei.
	I tua atu, ka taea e ia te urutau ki te whānuitanga o etahi atu tono. Ka whakamahia e te tari hangarau etahi kaupapa motuhake hei whakaiti i nga ururua rawa i te wa e mahi ana etahi waahanga, te whakaiti i nga tapahi me nga ururua.
	Ma tenei tikanga ka taea te inenga tika me te hanga ngawari mo te whakaurunga ki runga i nga mata, ma te whakamahi i nga momo punaha huihuinga whaimana me nga taapiri kitea, huna ranei.

Whānui	1220mm, 1250mm, 1500mm
Te roa	I runga i te tono, engari he pai ake <5800mm
Paewhiri Matotoru	2mm~ 6mm
Alu.Skin Thickness	0.21mm~0.50mm: 0.21mm, 0.30mm, 0.40mm, 0.50mm
Rahi Paerewa	1220mm x 2440mm (4' x 8'); 1500mm x 3050mm (5' x 10')
Nga Tae	45 nga tae o te wheketere mo te tohutoro
Ko etahi atu	Whakaaetia te rahi me nga tae

Kao.	Haina	Tiamana	USA	Parani	UK
Kao.	GB/T8627	DIN 4102	ASTM E84	NFF16-101	BS-476
1	A1, A2	A1, A2	NC	MO	O
2	B1	B1	A	M1, M2	1
3	B2	B2	B, C	M3	2, 3

Tohu	Tūemi	Tohu	Tūemi
A	Kore-tahu	B1	Maama-tahu
B2	Ngahurutanga	B3	Ka tahuna
Tohu	Rauemi	Ko nga Tohu Mahi Whakawera
Kore-tahu	Rauemi akomanga A	E ai ki te whakamātautau GB/T8625, te roa toharite o te toenga≤35cm (tae atu ki tetahi tauira toenga roa≥20cm) mo ia whakamātautau me te toharite hau rewharewha pāmahana peak≤150℃, kahore tauira hoki mura ahi te scene; E ai ki te whakamatautau GB / T8627, o ratou taumata paowa paowa (SDR) ≤15; E ai ki te whakamatautau GB / T14002 me GB / T14403, tona uara calorific≤4.2MJ/kg, me te tauira waiariki tukunga mo ia wae area≤16.8MJ/m2; Ko nga mea paitini ka wera i te hau rewharewha o te kukū kore whakamate katoa o≥25 mg/L.
Maama-tahu	Rauemi o te akomanga B1	E ai ki te whakamatautau GB/T8626, me tutuki ona ahuatanga ngingiha ki te GB/T8626, kaua hoki e tukua kia tahuna te pepa tātari; E ai ki te whakamatautau GB/T8625, ko te toharite o ia tauira e toe ana te roa≥15cm (tae atu ki nga toenga tauira roa≥0cm), me te pāmahana teitei toharite o te hau≤200℃ i ia whakamatautau. E ai ki te whakamatautau GB/T8627, o ratou taumata kiato auahi (SDR)≤75.

Kao.	Tūemi Whakamātautau	Tikanga Whakamatau	Taurangi Hangarau	Hua
1	Te uara iti o te roa e toe ana i muri i te wera (mm)	GB/T8625-88	> 0	480
2	Uara Toharite o te roa e toe ana i muri i te weranga (mm)	GB/T8625-88	≥ 150	160
3	Te pāmahana o te auahi (℃)	GB/T8625-88	≤ 200	78
4	Teitei o te ahi (mm)	GB/T8625-88	≤150	12
5	Koeke o te kiato auahi	GB/T8627-88	< 75	9

Mo JiaShunCai Composite Panels

Te haumaru ahi (FR B1 A2) ACP

Aluminum Spherical Core Panel

He aha te whakamahi i te Paewhiri Hiato Aluminium

ACP Anodised

ACP PE

PVDF ACP

He ngawari ki te tukatuka ACP

ACP Kore e taea te pakaru

Te 15-Step Engineering Order Process

	Te wero me te tapahi mate o te papa hiato
	Ka taea te werohia me te tapahi i nga panui konumohe ma te whakamahi i nga miihini CNC ki te urutau i nga hoahoa ki nga hiahia kaupapa motuhake, me te whakarite i te ma me te tino tika. Ka whakaekea e matou nga momo ahua me nga tauira kowhatu, tae atu ki te kaha ki te whakaputa i nga whakaahua katoa penei i nga kapua tohu, e taea ai te hanga i nga hoahoa uaua ma nga momo momo whiu.

	Nga tapa papa hiato
	Ko te taha o te taha e mau ana i te matua o te panui, hei whakamarumaru mai i te huarere me te whakanui ake i te ma, te ahua ngaio o te mata. Ka tukuna e matou nga momo tapa e toru: kotahi (huna i te taha), takirua o roto (huna i te taha me tetahi waahanga o te mata o muri), me te rua o waho (huna te tapa me te toro atu i te ripa hei huna i nga hononga ki etahi atu pepa panui).

	Paewhiri hiato kopikopiko
	Ka taea te piko ki roto i nga ahunga concave, convex ranei, poutū, whakapae ranei, a ka taea te tono ki nga kongakonga me nga ripa kore ranei, e tika ana mo nga punaha whakaurunga kitea me te huna.

	Te hanga
	Ka taea te whakahaere i tenei mahi i roto i te awheawhe, i runga ranei i te waahi, i nga wa katoa i roto i te waahi ma, kua tino tiakina, kua urutau. Ko nga ahua o nga rīpene kaore i te herea ki nga momo tapawha tawhito; ka taea hoki te hoahoa ki nga ahua 3D.

Rakau Rakau	Whakaata	Moananui Teitei	Maama
Tae Mārō	Repuhia te peita	Mapere	Kua paraitia

Whānui	1220mm, 1250mm, 1500mm
Te roa	2440mm, 3050mm, 4050mm, 5000mm
Paewhiri Matotoru	2mm, 3mm, 4mm, 5mm, 6mm kua whakaritea ranei
Alu.Skin Thickness	0.08mm, 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm kua whakaritea ranei
Rahi Paerewa	1220mm x 2440mm (4' x 8')
Ko etahi atu	Whakaaetia te rahi ritenga hoki

Mātotoru	±0.20 mm
Konumohe matotoru	±0.02 mm
Whānui	±2.0 mm
Te roa	±3.0 mm
Hauroki	±5.0 mm
Te Roha Ngawha	2.40 mm/m@100 ℃ rerekētanga Temp

Pencil Hardness	> HB
Paemahana Ātete	-40℃~80℃
Te Kaha Paanga	50 kg cm2
Atete Wai Kohua	Kohuatia mo te 2 haora kaore he huringa
Ātete Waikawa	Rukuhia te mata ki te 5% HCl mo te 24 haora kaore he huringa
Ātete Alkali	Rukuhia te mata ki te 5% NaOH mo nga haora 24 kaore he huringa
Atete hinu	Rukuhia te mata ki te hinu miihini 20# mo te 24 haora kaore he huringa
Wairewa Ātete	Ka horoia nga wa 100 ki te Dimethylbenzene kaore he huringa
Horoi Atete	> 1000 nga wa kaore he huringa
Te kaha kiri 180°	>5 N/mm
Ātete Matao	-40 ℃

Tūemi Whakamātautau	Paerewa	Hua
Taumaha Waeine	ASTM D792	T4mm=5.5kg/m²
Te Roha Ngawha	ASTM D696	24-28
Te Weahanga Huringa Ngaaahu	ASTM D648	115℃
Kawenga Ngawha	ASTM D976	0.102kcal/m.hr ℃
Atete Paanga	ASTM D732	1.640kgf
Te Kaha Whakapiri	ASTM D903	0.77kg/mm
Te Elasticity	ASTM D790	4030kg/mm²
Ātete Kutikuti	ASTM D732	2.7 kgf/mm²
Ātete hau-pēhanga	ASTM E330	KUA
Nga Taonga ki te Wai	ASTM E331	KUA

Momo Rawa	Aratau Tatau	Nga Awangawanga Kiritaki Int'l
Paewhiri Matua	Te waahi tuwhera + 8% moumou	Te riterite o te puranga tae
Kete taputapu	Te whakairi i nga korero / hiri @ 1:1.2	Koeke aukati-waikura (C5-M)
Te takai	Nga wehewehe honikoma + arai makuku	Te whakahaere i te haumuku o nga waka moana

Nga whakaritenga hua	Whakaahuatia
Whakamahi Hua	Kaore e mura, e tika ana mo nga tono o waho.
Rauemi	He mea hanga mai i nga koranu konumohe penei i te 5052, 3003, me te 1100.
Whanonga Ahi	A2 haumaru ahi (EN 13501-1:2018).
Ahu Paerewa	Rahi e wātea ana: 1250x2500 mm me 1550x3200 mm.
Whānui Paerewa	Te whanui paerewa: 1250 mm, 1550 mm ranei.
Te roa	Te roa teitei: 6000 mm.
Te Matotoru Tapeke	Te matotoru auau: 4.0 mm (e waatea ana i te 2.5-6.0 mita).
Runga Konumohe Matotoru	0.5 millimeters ki te 0.7 millimeters
Taumaha	Taumaha: 4.54 kg/mita tapawha (mo te 4.0 mm te matotoru).
Maimoatanga Mata	Ka mutu te mata: PVDF, FEVE, anodized, tae matakite.
PVDF/FEVE Tae	tae parakore, tae konganuku, oro rakau, oro kohatu, mutu paraihe.
Taurangi	Pūtāhui: 15 tau.
Te Paemahana e tika ana	Awhe pāmahana: -40°C ki te 80°C.
Whakamātautau-kore	Paerewa: AS 1530.1/BS467/EN13501/ASTM E84.
Te takai	Palleti rakau, 8 pallets ia ipu 20GP, 16 pallets ia ipu 40GP.