A:Free provision: project feasibility analysis + case study of similar areas.

Q:Can aluminum Composite panels be installed on complex curved facades? How can precision be ensured?

A:Customizable implementation, technical solutions include: • 3D laser scanning + BIM modeling: accurately obtain wall surface data, prefabricate irregular panels; • Adjustable transition system: uses universal angle codes and three-dimensional adjustable trusses, allowing for ±15mm correction; • Segmented tight fitting process: decomposes curved surfaces into multiple linear planes, minimizing fitting errors. We provide on-site surveying and surface deepening design services.

Q:How do ultra-high-rise buildings address the wind pressure resistance issues of aluminum composite panels alucobond ?

A:Core technical countermeasures: 1. Mechanical verification: Calculate the thickness of the panels and the density of attachment points based on the local wind pressure value for a once-in-50-years event (e.g., ≥1.5 kN/㎡). 2. Enhanced anchorage: Use a combination of back bolts and mechanical hangers for dual fixation (at least 6 attachment points per panel). 3. Wind tunnel depressurization design: Install hidden air channels within the panel joints to balance internal and external air pressure. The team includes structural engineers who can provide wind pressure calculation reports and seismic resistance reports.

Q:How can installations be made without demolishing old walls during the renovation of existing buildings?

A:Innovative solutions: • Dry construction method: New base layer constructed using light steel keel framework (80-150mm away from the original wall) to avoid issues related to the flatness of the old walls; • Non-destructive anchoring: Use of chemical anchors to penetrate the insulation layer and reach the structural layer, preventing vibration-induced cracking; • Quick plug-and-play system: Pre-installed clips on panels increase on-site assembly efficiency by 50%. Successfully completed 17 renovation projects, with the fastest completion time being 15 days for a 1000 square meter project.

Q:How to prevent condensation on aluminum composite panels alucobond due to cold bridging in cold regions?

A:Custom thermal break technology: Technical solutions 1. Thermal break profile system → The profiles incorporate PA66 nylon thermal break strips with a thermal conductivity of ≤0.3 W/(m·K). 2. Layered sealing structure → Closed-cell foam rods are filled within the panel joints, covered externally by elastic sealant. 3. Condensate drainage → Water channels are set on the back of the profiles, connecting to vertical drainage ducts. * Can provide thermal simulation reports and dedicated accessory packages for projects below -30°C.

About Project Technical Consultancy Solutions-aluminum composite panel-aluminum facade panel-aluminum baffle ceiling

Babagan Solusi Konsultasi Teknis Proyek

Proyek & Dhukungan Teknis Hubungi Saiki

1.Layanan

1.1 Solusi proyek

Supplier nduweni kemampuan kanggo nglayani proyek teknik para panuku profesional, kayata kontraktor utawa perusahaan desain

1.2 Kapabilitas desain proyek

Supplier bisa nyedhiyakake layanan desain 2D lan 3D kanggo para panuku teknik

1.3 Instalasi ing situs

Supplier bisa nyedhiyakake layanan tindak lanjut ing situs kanggo para panuku teknik

1.4 Dhukungan teknis ing situs

Supplier bisa ngirim insinyur kanggo dhukungan layanan lokal

1.5 Pengadaan siji-mandeg

Supplier bisa nyedhiyakake layanan desain portofolio produk multi-kategori

2.Kontrol kualitas

2.1 Garansi kasedhiya

Pemasok nyedhiyakake layanan jaminan kualitas

2.2 Kualitas traceability

Ndhukung panuku ing traceability kualitas

2.3 Instrumen tes

Jumlah unit peralatan testing produk supplier

2.4 Inspeksi materi ing situs

Pemasok duwe proses inspeksi sing relevan kanggo bahan mentah produk iki

2.5 Identifikasi keterlacakan bahan mentah

Ndhukung panuku ing traceability kualitas

2.6 Inspeksi produk rampung

Supplier nindakake inspeksi sing ketat ing kabeh produk sing wis rampung

2.7 Inspektur QA/QC

Jumlah karyawan inspeksi QA/QC pemasok

3.Sertifikasi

Sertifikat ISO 9001

Sertifikat SGS

Sertifikat FR SGS

Apa sampeyan pengin ndeleng finish iki ditrapake ing fasad?

Akses menyang simulator fasad kita

Utawa proyek Inspirasi Rampung?

Telusuri Proiect & Aplikasi

Pawarta sing gegandhengan

Jan. 19, 2026

A Practical Guide To Modern Aluminium Composite Panels

In today’s construction and decoration market, people care less about complicated technical terms and more about whether a material is durable, good-looking, and easy to use. From commercial buildings to everyday urban spaces, exterior and interior wall materials must balance performance

Ndeleng Liyane

Mar. 09, 2026

Celebrating International Women’s Day: Gifts for Employees on March 8

Honoring Female Employees on International Women’s Day Every year on International Women’s Day (March 8), companies around the world celebrate and recognize the important contributions of women in the workplace. To express appreciation and respect, many organizations prepare thoughtful gifts and activities for their female employees. At JIASHUNCAI, the company also celebrates this special day by giving Women’s Day gifts to employees, showing gratitude for their dedication, hard work, and contributions to the company’s development.

Ndeleng Liyane

Dec. 07, 2025

Acoustical Properties of Aluminum Baffle Ceilings

In commercial and public spaces—from office lobbies and conference halls to schools and airpor

Ndeleng Liyane

09 Oktober 2025

Aluminium Grid Ceiling entheng Mbangun

Langit-langit Grid Aluminium kanthi konstruksi sing entheng wis dadi game-changer ing desain lan konstruksi interior, nawakake efisiensi sing ora cocog ing instalasi, tabungan struktural, lan versatility estetis.

Ndeleng Liyane

Why Africa's Construction Boom Needs Quality ACP? Insights from Jiashuncai's Market Survey (Ethiopia & Senegal)

22 Juli 2025

Napa Boom Konstruksi Afrika Perlu ACP Kualitas? Survei Pasar Jiashuncai (Ethiopia & Senegal)

Pabrik Jiashuncai ACP nuduhake temuan mbukak saka perjalanan Afrika: kesempatan Panel Komposit Aluminium ing Ethiopia & Senegal. Hubungi kita kanggo rapat-rapat ing situs!

Ndeleng Liyane

Sustainability of Aluminum Facade Panels

22 September 2025

Kelestarian Panel Fasad Aluminium

Panel fasad aluminium-kalebu panel fasad aluminium serbaguna lan fac aluminium awet

Ndeleng Liyane

	Mesin saka panel komposit
	Panel komposit aluminium bisa mesin nggunakake mesin CNC
	utawa kanthi manual nganggo gergaji tembok utawa router portabel.
	Kajaba iku, ngidini adaptasi kanggo macem-macem aplikasi liyane. Kantor teknis nggunakake program khusus kanggo nyilikake sampah material sajrone mesin bagean, nyuda potongan lan sampah.
	Cara iki mbisakake pangukuran sing tepat lan gampang dibentuk kanggo instalasi ing fasad, nggunakake macem-macem sistem perakitan sing disertifikasi kanthi fixings sing katon utawa didhelikake.

Jembar	1220mm, 1250mm, 1500mm
dawa	Yen dikarepake, nanging luwih becik <5800mm
Ketebalan Panel	2 mm ~ 6 mm
Alu.Ketebalan Kulit	0.21mm~0.50mm: 0.21mm, 0.30mm, 0.40mm, 0.50mm
Ukuran Standar	1220mm x 2440mm (4' x 8'); 1500mm x 3050mm (5' x 10')
werna-werna	Standar pabrik 45 warna kanggo referensi
liyane	Nampa ukuran lan warna khusus uga

Ora.	Cina	Jerman	USA	Prancis	UK
Ora.	GB/T8627	DIN 4102	ASTM E84	NFF16-101	BS-476
1	A1, A2	A1, A2	NC	FOR	O
2	B1	B1	A	M1, M2	1
3	B2	B2	B, C	M3	2, 3

gelar	Item	gelar	Item
A	None-pembakaran	B1	Pangobongan atos
B2	Pangobongan	B3	Bisa kobong
gelar	Materi	Indikator Kinerja Pembakaran
None-pembakaran	Materi Kelas A	Miturut test GB / T8625, dawa rata-rata isih≤35cm (kalebu sembarang spesimen ampas length≥20cm) kanggo saben test lan rata-rata suhu gas flue peak≤150 ℃, ora spesimen bali burner pemandangan; Miturut tes GB / T8627, tingkat Kapadhetan kumelun (SDR) ≤15; Miturut tes GB / T14002 lan GB / T14403, nilai kalor≤4.2MJ / kg, lan emisi termal spesimen per unit area≤16.8MJ / m2; Toksisitas bahan bakar gas flu saka kabeh konsentrasi non-mati ≥25 mg/L.
Pangobongan atos	Materi Kelas B1	Miturut test GB / T8626, situs pangobongan sawijining kudu ketemu GB / T8626, lan ora ngidini sembarang nempel saka pangobongan ngobong kertas Filter; Miturut test GB / T8625, rata-rata saben spesimen isih length≥15cm (kalebu sembarang spesimen ampas length≥0cm), lan rata-rata suhu puncak gas≤200 ℃ ing saben test. Miturut tes GB / T8627, tingkat kapadhetan kumelun (SDR) ≤75.

Ora.	Item Tes	Metode Tes	Indeks Teknis	asil
1	Nilai minimal saka sisa dawa sawise kobong (mm)	GB / T8625-88	> 0	480
2	Nilai rata-rata dawa sing isih ana sawise kobong (mm)	GB / T8625-88	≥ 150	160
3	Suhu kumelun (℃)	GB / T8625-88	≤ 200	78
4	Dhuwur geni (mm)	GB / T8625-88	≤150	12
5	Kapadhetan asap	GB / T8627-88	< 75	9

Babagan JiaShunCai Composite Panels

Fire safety (FR B1 A2) ACP

Aluminum Spherical Core Panel

Apa Gunakake Aluminium Composite Panel

ACP anodized

ACP PE

PVDF ACP

Gampang kanggo proses ACP

ACP inti sing ora bisa dipecah

Proses Urutan Teknik 15 Langkah

	Punching lan die cutting saka panel komposit
	Panel komposit aluminium bisa ditindhes lan die-cut nggunakake mesin CNC kanggo ngganti desain kanggo kabutuhan proyek tartamtu, njamin finish sing resik lan tepat. We offer macem-macem wangun lan pola perforasi, kalebu kemampuan kanggo ngasilake gambar lengkap kaya titik maya, ngidini kanggo nggawe desain ruwet liwat macem-macem Techniques punching.

	Edge panel komposit pinggiran
	Pinggiran kasebut nutupi inti panel, nglindhungi saka cuaca lan nambah tampilan profesional sing resik lan profesional. We offer telung jinis sudhut: siji (ndhelikake pinggiran), interior pindho (ndhelikake pinggiran lan bagéan saka pasuryan mburi), lan pindho njaba (ndhelikake pinggiran lan ngluwihi tab kanggo ndhelikake joints karo sheets panel liyane).

	Panel komposit mlengkung
	Mlengkung bisa dumadi ing arah cekung utawa cembung, kanthi vertikal utawa horisontal, lan bisa ditrapake ing potongan nganggo utawa tanpa tab, cocok kanggo sistem instalasi sing katon lan didhelikake.

	mbentuk
	Proses iki bisa ditindakake ing bengkel utawa ing papan, tansah ing lingkungan sing resik, dilindhungi khusus, lan disesuaikan. Wangun saka kaset ora diwatesi kanggo wangun persegi dowo tradisional; padha uga bisa dirancang ing wangun 3D.

Gandum Kayu	Pangilon	Gloss Dhuwur	metalik
Warna Solid	Lukisan Semprotan	Marmer	Disikat

Jembar	1220mm, 1250mm, 1500mm
dawa	2440mm, 3050mm, 4050mm, 5000mm
Ketebalan Panel	2mm, 3mm, 4mm, 5mm, 6mm utawa selaras
Alu.Ketebalan Kulit	0.08mm, 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm utawa selaras
Ukuran Standar	1220mm x 2440mm (4'x8')
liyane	Nampa ukuran khusus uga

kekandelan	± 0,20 mm
Ketebalan aluminium	± 0,02 mm
Jembar	± 2,0 mm
dawa	± 3,0 mm
Diagonal	± 5,0 mm
Ekspansi Termal	2,40 mm / m @ 100 ℃ prabédan Temp

Ketebalan Pensil	> HB
Tahan Suhu	-40 ℃ ~ 80 ℃
Kekuwatan Dampak	50 kg cm2
Tahan banyu nggodhok	Godhok nganti 2 jam tanpa owah-owahan
Tahan Asam	Lebokake permukaan ing HCl 5% suwene 24 jam tanpa owah-owahan
Tahan alkali	Lebokake permukaan ing NaOH 5% suwene 24 jam tanpa owah-owahan
Tahan lenga	Kacemplungaken lumahing ing 20 # lenga mesin kanggo 24 jam tanpa ngganti
Rintangan pelarut	Diresiki 100 kaping karo Dimethylbenzene tanpa owah-owahan
Reresik Resistance	> 1000 kaping tanpa owah-owahan
Kekuwatan kulit 180 °	> 5 N/mm
Tahan Dingin	-40 ℃

Item Pengujian	Standar	asil
Unit Bobot	ASTM D792	T4mm = 5.5kg/m²
Ekspansi Termal	ASTM D696	24-28
Suhu deformasi termal	ASTM D648	115 ℃
Konduksi Termal	ASTM D976	0,102 kkal/m
Ketahanan Dampak	ASTM D732	1,640kgf
Kekuwatan Adhesive	ASTM D903	0,77 kg/mm
Elastisitas lentur	ASTM D790	4030kg/mm²
Tahan geser	ASTM D732	2,7 kgf/mm²
Tahanan tekanan angin	ASTM E330	LULUS
Properties Nglawan Banyu	ASTM E331	LULUS

Jinis Bahan	Logika Kalkulasi	Keprigelan Klien Int'l
Panel Utama	Area unfolded + 8% wastage	Konsistensi batch warna
Kit Aksesoris Kab	Mounting profil / asu laut @ 1:1.2	Kelas anti karat (C5-M)
Kemasan	Pembagi honeycomb + penghalang kelembapan	Kontrol kelembapan kargo laut

Spesifikasi produk	Nggambarake
Panggunaan produk	Non-flammable, cocok kanggo aplikasi njaba.
Bahan	Digawe saka wesi aluminium kayata 5052, 3003, lan 1100.
Prilaku geni	A2 safety geni (EN 13501-1:2018).
Ukuran Standar	Ukuran sing kasedhiya: 1250x2500 mm lan 1550x3200 mm.
Jembar standar	Jembar standar: 1250 mm utawa 1550 mm.
dawa	Dawane maksimal: 6000 mm.
Total Kekandelan	Ketebalan biasa: 4,0 mm (kasedhiya ing 2,5-6,0 meter).
Kekandelan Aluminium Top	0,5 milimeter nganti 0,7 milimeter
Bobot	Bobot: 4,54 kg / meter persegi (kanggo kekandelan 4,0 mm).
Perawatan lumahing	Rampung lumahing: PVDF, FEVE, anodized, werna spektral.
PVDF/FEVE Warna	werna murni, werna metalik, nada kayu, nada watu, Rampung disapu resik.
Njamin	Garansi: 15 taun.
Suhu sing ditrapake	Kisaran suhu: -40°C nganti 80°C.
Non-combustibility Test	Standar: AS 1530.1/BS467/EN13501/ASTM E84.
Kemasan	Pallet kayu, 8 pallets saben 20GP wadhah, 16 pallets saben 40GP wadhah.