A:Free provision: project feasibility analysis + case study of similar areas.

Q:Can aluminum Composite panels be installed on complex curved facades? How can precision be ensured?

A:Customizable implementation, technical solutions include: • 3D laser scanning + BIM modeling: accurately obtain wall surface data, prefabricate irregular panels; • Adjustable transition system: uses universal angle codes and three-dimensional adjustable trusses, allowing for ±15mm correction; • Segmented tight fitting process: decomposes curved surfaces into multiple linear planes, minimizing fitting errors. We provide on-site surveying and surface deepening design services.

Q:How do ultra-high-rise buildings address the wind pressure resistance issues of aluminum composite panels alucobond ?

A:Core technical countermeasures: 1. Mechanical verification: Calculate the thickness of the panels and the density of attachment points based on the local wind pressure value for a once-in-50-years event (e.g., ≥1.5 kN/㎡). 2. Enhanced anchorage: Use a combination of back bolts and mechanical hangers for dual fixation (at least 6 attachment points per panel). 3. Wind tunnel depressurization design: Install hidden air channels within the panel joints to balance internal and external air pressure. The team includes structural engineers who can provide wind pressure calculation reports and seismic resistance reports.

Q:How can installations be made without demolishing old walls during the renovation of existing buildings?

A:Innovative solutions: • Dry construction method: New base layer constructed using light steel keel framework (80-150mm away from the original wall) to avoid issues related to the flatness of the old walls; • Non-destructive anchoring: Use of chemical anchors to penetrate the insulation layer and reach the structural layer, preventing vibration-induced cracking; • Quick plug-and-play system: Pre-installed clips on panels increase on-site assembly efficiency by 50%. Successfully completed 17 renovation projects, with the fastest completion time being 15 days for a 1000 square meter project.

Q:How to prevent condensation on aluminum composite panels alucobond due to cold bridging in cold regions?

A:Custom thermal break technology: Technical solutions 1. Thermal break profile system → The profiles incorporate PA66 nylon thermal break strips with a thermal conductivity of ≤0.3 W/(m·K). 2. Layered sealing structure → Closed-cell foam rods are filled within the panel joints, covered externally by elastic sealant. 3. Condensate drainage → Water channels are set on the back of the profiles, connecting to vertical drainage ducts. * Can provide thermal simulation reports and dedicated accessory packages for projects below -30°C.

About Project Technical Consultancy Solutions-aluminum composite panel-aluminum facade panel-aluminum baffle ceiling

Mabapi le Project Technical Consultancy Solutions

Merero & Tšehetso ea Theknoloji Ikopanye Hona Joale

1.Tshebeletso

1.1 Litharollo tsa morero

Morekisi o na le bokhoni ba ho sebetsa mererong ea boenjiniere ea bareki ba litsebi, joalo ka likonteraka kapa lik'hamphani tsa meralo

1.2 Bokhoni ba moralo oa morero

Morekisi a ka fana ka lits'ebeletso tsa meralo ea 2D le 3D bakeng sa bareki ba boenjiniere

1.3 Ho kenya setšeng

Morekisi a ka fana ka lits'ebeletso tsa ho latela setšeng bakeng sa bareki ba boenjiniere

1.4 Tšehetso ea tekheniki sebakeng sa marang-rang

Morekisi a ka romela lienjineri bakeng sa tšehetso ea litšebeletso tsa lehae

1.5 Theko ea thepa e le 'ngoe

Morekisi a ka fana ka lits'ebeletso tsa moralo oa li-portfolio tsa mekhahlelo e mengata

2.Taolo ea boleng

2.1 Tiisetso e teng

Morekisi o fana ka litšebeletso tsa netefatso ea boleng

2.2 Boleng ba ho latedisa

E ts'ehetsa bareki ho latedisa boleng

2.3 Lisebelisoa tsa teko

Palo ea lisebelisoa tsa ho hlahloba lihlahisoa tsa mofani oa thepa

2.4 Tlhahlobo ea thepa ea setšeng

Morekisi o na le mokhoa o nepahetseng oa tlhahlobo bakeng sa lisebelisoa tse tala tsa sehlahisoa sena

2.5 Identification ea raw-material traceability

E ts'ehetsa bareki ho latedisa boleng

2.6 E qetile tlhahlobo ea lihlahisoa

Morekisi o etsa tlhahlobo e matla lihlahisoa tsohle tsa eona tse felileng

2.7 Bahlahlobi ba QA/QC

Palo ea basebetsi ba tlhahlobo ea QA/QC ea mofani oa thepa

3.Setifikeiti

Setifikeiti sa ISO9001

Setifikeiti sa SGS

Setifikeiti sa FR SGS

Na u batla ho bona pheletso ee e sebelisoa ka facade?

Ho fihlella simulator ea rona ea facade

Kapa Inspiration e phethiloe merero?

Batla Proiect & Application

Litaba Tse Amanang

Jan. 24, 2026

Vibrant and Practical PE ACP Panels

In modern architecture and commercial decoration, pe acp has become a highly popular material for designers, builders, and advertisers. This type of panel features a polyethylene core sandwiched between two aluminum skins, with the front surface coated in polyester paint. Its vibrant design

Sheba Tse ling

Supplier ACP Panel Malaysia - Pembekal Panel Komposit Aluminium Tahan Api

La 09 Phupu 2025

ACP Panel Supplier Malaysia - Aluminium Composite Panel Supplier e sa cheseheng

Ho feta 40 square metres ea mabota a kantle! Feme e na le boikarabelo ba ho reka sete e feletseng ea kopano. Bakeng sa bahlahisi ba kholo, litaelo tse nyenyane ha lia thibeloa! Ho lebella phello ka mor'a ho kenya.

Sheba Tse ling

Jiashuncai Anodized Fireproof ACP: Revolutionizing Cruise Ship Cabin Interiors with Safety & Style

La 26 Phupu, 2025

Jiashuncai Anodized Fireproof ACP: Ka hare ho Kamore ea Sekepe sa Sekepe sa Phetoho ka Polokeho le Setaele

Tseba Tharollo ea ho Koala e Tšoarellang, e Khabane, le e Lumellanang le Khoutu bakeng sa Lijana tsa Sejoale-joale

Sheba Tse ling

Jan. 24, 2026

Stylish and Practical Aluminum Ceilings for Modern Interiors

In modern architecture, aluminium ceiling board has emerged as an essential material for public and commercial spaces. Lightweight, durable, and versatile, aluminum ceilings are resistant to moisture, corrosion, and fire, making them ideal for airports, malls, offices, hospitals, and hotels

Sheba Tse ling

La 19 Hlakubele 2025

Bareki ba Palestina ba etetse JiaShunCai

JiaShunCai e amohela bareki ba tsoang Palestina. Bareki bana ba boletse hore ba ikarabella mererong ea kaho le mesebetsi e meng metseng ea habo bona, mme ba lebelletse ho ba le likamano tsa nako e telele tsa khoebo le phepelo le JiaShunCai. JiaShunCai e tla fana ka tšehetso bakeng sa tharollo ea boenjiniere ho bona.

Sheba Tse ling

Dec. 18, 2025

Aluminium facade cladding chemical resistance testing

In modern architectural engineering, aluminium facade cladding not only undertakes the decorati

Sheba Tse ling

	Mechine ea liphanele tse kopantsoeng
	Liphanele tse kopantsoeng tsa aluminium li ka etsoa ka mochini oa CNC
	kapa ka letsoho ka sakha ea lebota kapa router e nkehang.
	Ho feta moo, e lumella ho ikamahanya le mefuta e mengata ea lisebelisoa tse ling. Ofisi ea botekgeniki e sebelisa mananeo a ikhethileng ho fokotsa litšila tsa thepa nakong ea ho sebetsa ka mokhoa o itseng, ho fokotsa likheo le litšila.
	Mokhoa ona o nolofalletsa litekanyo tse nepahetseng le sebopeho se bonolo bakeng sa ho kenya li-facade, ho sebelisa mekhoa e fapaneng ea kopano e tiisitsoeng e nang le lisebelisoa tse bonahalang kapa tse patehileng.

Thollo ea Lehong	Seipone	Khanya e Phahameng	Metallic
Mmala o tiileng	Ho penta ka Spray	Mabole	Hlatsoa

Bophara	1220mm, 1250mm, 1500mm
Bolelele	2440mm, 3050mm, 4050mm, 5000mm
Botenya ba Panel	2mm, 3mm, 4mm, 5mm, 6mm kapa customized
Alu.Botenya ba Letlalo	0.08mm, 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm kapa customized
Boemo bo tloaelehileng	1220mm x 2440mm (4' x 8')
Ba bang	Amohela le boholo ba tloaelo

Bophara	1220mm, 1250mm, 1500mm
Bolelele	Ka kopo, empa ka ho khetheha <5800mm
Botenya ba Panel	2mm ~ 6mm
Alu.Botenya ba Letlalo	0.21mm ~ 0.50mm: 0.21mm, 0.30mm, 0.40mm, 0.50mm
Boemo bo tloaelehileng	1220mm x 2440mm (4' x 8'); 1500mm x 3050mm (5' x 10')
Mebala	Mebala e tloaelehileng ea feme e 45 bakeng sa litšupiso
Ba bang	Amohela boholo ba tloaelo le mebala hape

Che.	China	Jeremane	usa	Fora	UK
Che.	GB/T8627	DIN 4102	ASTM E84	NFF16-101	BS-476
1	A1, A2	A1, A2	NC	BAKENG SA	O
2	B1	B1	A	M1, M2	1
3	B2	B2	B, C	M3	2, 3

Mabapi le JiaShunCai Composite Panels

Hobaneng U Sebelisa Aluminium Composite Panel

Tšireletseho ea mollo (FR B1 A2) ACP

Anodised ACP

ACP PE

PVDF ACP

Ho bonolo ho sebetsa ACP

Core ACP e sa senyeheng

Ts'ebetso ea Taelo ea Boenjiniere ea Mehato e 15

	Ho khabisa lithako tsa phanele tse kopaneng
	The edging e koala mokokotlo oa phanele, ho e sireletsa ho boemo ba leholimo le ho ntlafatsa ponahalo e hloekileng le ea botsebi ea façade. Re fana ka mefuta e meraro ea likhahla: e le 'ngoe (e pata moeli), ka hare ho habeli (e pata moeli le karolo ea sefahleho se ka morao), le ka ntle habeli (e pata moeli mme e atolose tabo ho pata manonyeletso le maqephe a mang a phanele).

	Li-panels tse kobehileng
	Ho kobeha ho ka etsahala ka tsela ea concave kapa convex, e ka ba e otlolohileng kapa e otlolohileng, 'me e ka sebelisoa likotoana tse nang le kapa ntle le li-tab, tse loketseng lits'ebetso tse bonoang le tse patiloeng tsa ho kenya.

	Ho theha
	Ts'ebetso ena e ka etsoa ka har'a lithupelo kapa sebakeng sa marang-rang, e lula e le sebakeng se hloekileng, se sirelelitsoeng ka ho khetheha, 'me se ikamahanya le maemo. Libopeho tsa lik'hasete ha lia lekanyetsoa ho mefuta e tloaelehileng ea khutlonnetsepa; li ka boela tsa etsoa ka libopeho tsa 3D.

Degree	Ntho	Degree	Ntho
A	Ha ho mollo	B1	Ho tuka ka thata
B2	Ho tuka	B3	E tukang
Degree	Lintho tse bonahalang	Lipontšo tsa Ts'ebetso ea Combustion
Ha ho mollo	Boitsebiso ba Sehlopha sa A	Ho latela tlhahlobo ea GB/T8625, bolelele ba karolelano ea ba setseng≤35cm (ho kenyeletsoa le mofuta ofe kapa ofe o setseng oa mohlala≥20cm) bakeng sa tlhahlobo e 'ngoe le e' ngoe le karolelano ea mocheso oa mocheso oa khase ea mocheso≤150℃, ha ho na mohlala oa morao-rao; Ho ea ka tlhahlobo ea GB/T8627, maemo a bona a mosi oa mosi (SDR)≤15; Ho latela tlhahlobo ea GB/T14002 le GB/T14403, boleng ba eona ba khalori≤4.2MJ/kg, le mohlala oa tlhahiso ea mocheso sebakeng sa yuniti≤16.8MJ/m2; Lintho tse chefo li chesa khase ea ntaramane ea bongata bo sa bolaeeng ba≥25 mg/L.
Ho tuka ka thata	Lisebelisoa tsa Sehlopha sa B1	Ho latela tlhahlobo ea GB/T8626, thepa ea eona e tukang e lokela ho kopana le GB/T8626, 'me ha e lumelle ho theoha ha mollo ho chesa pampiri ea sefa; Ho latela tlhahlobo ea GB/T8625, karolelano ea mohlala o mong le o mong o setseng bolelele≥15cm (ho kenyeletsoa leha e le efe e setseng ea mohlala oa bolelele≥0cm), le mocheso o phahameng oa mocheso oa khase≤200℃ tekong ka 'ngoe. Ho latela tlhahlobo ea GB/T8627, maemo a bona a mosi oa mosi (SDR)≤75.

Che.	Ntho ea Teko	Mokhoa oa Teko	Index ea Theknoloji	Sephetho
1	Bonyane bo tlase ba bolelele bo setseng ka mor'a ho chesa (mm)	GB/T8625-88	> 0	480
2	Karolelano ea boleng ba bolelele bo setseng ka mor'a ho chesa (mm)	GB/T8625-88	≥ 150	160
3	Thempereichara ea mosi (℃)	GB/T8625-88	≤200	78
4	Bophahamo ba mollo (mm)	GB/T8625-88	≤150	12
5	Mokhahlelo oa ho teteana ha mosi	GB/T8627-88	<75	9

Botenya	± 0.20 limilimithara
Botenya ba aluminium	± 0.02 limilimithara
Bophara	± 2.0 limilimithara
Bolelele	±3.0 limilimithara
Diagonal	± 5.0 limilimithara
Katoloso ea Mocheso	2.40 mm/m@100℃Phapang ea mocheso

Bothata ba Pencil	> HB
Ho hanyetsa Mocheso	-40 ℃ ~ 80 ℃
Matla a Tšusumetso	50 lik'hilograma cm2
Ho hanyetsa Metsi a Belang	Ho pheha lihora tse 2 ntle le phetoho
Ho hanyetsa Acid	Kenya bokaholimo ho 5% HCl bakeng sa lihora tse 24 ntle le phetoho
Alkali Resistance	Kenya bokaholimo ho 5% NaOH bakeng sa lihora tse 24 ntle le phetoho
Ho hanyetsa oli	Kenya bokaholimo ba oli ea enjine ea 20 # lihora tse 24 ntle le phetoho
Solvent Resistance	E hloekisitsoe ka makhetlo a 100 ka Dimethylbenzene ntle le phetoho
Ho Hloekisa Khanyetso	> makhetlo a 1000 ntle le phetoho
Matla a peel 180 °	>5 N/mm
Khanyetso e batang	-40 ℃

Ntho ea ho Leka	Standard	Sephetho
Boima ba Yuniti	ASTM D792	T4mm=5.5kg/m²
Katoloso ea Mocheso	ASTM D696	24-28
Thermal Deformation Temperature	ASTM D648	115 ℃
Thermal Conduction	ASTM D976	0.102kcal/m.hr℃
Impact Resistance	ASTM D732	1.640kgf
Matla a Sekhomaretsi	ASTM D903	0.77kg/mm
Flexural Elasticity	ASTM D790	4030kg/mm²
Shear Resistance	ASTM D732	2.7kgf/mm²
Khatello ea Moea	ASTM E330	FETILENG
Thepa Khahlanong le Metsi	ASTM E331	FETILENG

Mofuta oa Boitsebiso	Palo Moelelo	Matšoenyeho a Bareki ba Int'l
Liphanele tse ka sehloohong	Sebaka se bulehileng + 8% tšenyo	Ho lumellana ha sehlopha sa mebala
Lisebelisoa Kit	Ho kenya liprofaele/litiiso @ 1:1.2	Anti-corrosion grade (C5-M)
Sephutheloana	Likarohano tsa mahe a linotši + mokoallo oa mongobo	Taolo ea mongobo oa thepa ea leoatleng

Litlhaloso tsa sehlahisoa	Hlalosa
Tšebeliso ea Sehlahisoa	E sa cheseng, e loketseng lits'ebetso tsa kantle.
Lisebelisoa	E entsoe ka lisebelisoa tsa aluminium tse kang 5052, 3003, le 1100.
Boitšoaro ba Mollo	Tšireletso ea mollo ea A2 (EN 13501-1: 2018).
Litekanyo tse tloaelehileng	Boholo bo fumanehang: 1250x2500 mm le 1550x3200 mm.
Bophara bo Tloaelehileng	Bophara bo tloaelehileng: 1250 mm kapa 1550 mm.
Bolelele	Boholo ba bolelele: 6000 mm.
Botenya bo Felletseng	Botenya ba kamehla: 4.0 mm (e fumaneha ka limithara tse 2.5-6.0).
Botenya ba Aluminium bo holimo	0.5 limilimithara ho 0.7 limilimithara
Boima ba 'mele	Boima ba 'mele: 4.54 kg / square meter (bakeng sa 4.0 mm botenya).
Phekolo ea Bokaholimo	Liqeto tse holimo: PVDF, FEVE, anodized, mebala ea spectral.
PVDF/FEVE Mmala	mebala e hloekileng, mebala ea tšepe, lithane tsa lehong, lithane tsa majoe, ho qetela ho brushed.
Tiisetso	Warranty: lilemo tse 15.
Mocheso o sebetsang	Sebaka sa mocheso: -40°C ho isa ho 80°C.
Teko e sa cheng	Maemo: AS 1530.1/BS467/EN13501/ASTM E84.
Sephutheloana	Liphalete tsa lehong, liphalete tse 8 ka setshelo sa 20GP, lipalete tse 16 ka setshelo sa 40GP.