A:Free provision: project feasibility analysis + case study of similar areas.

Q:Can aluminum Composite panels be installed on complex curved facades? How can precision be ensured?

A:Customizable implementation, technical solutions include: • 3D laser scanning + BIM modeling: accurately obtain wall surface data, prefabricate irregular panels; • Adjustable transition system: uses universal angle codes and three-dimensional adjustable trusses, allowing for ±15mm correction; • Segmented tight fitting process: decomposes curved surfaces into multiple linear planes, minimizing fitting errors. We provide on-site surveying and surface deepening design services.

Q:How do ultra-high-rise buildings address the wind pressure resistance issues of aluminum composite panels alucobond ?

A:Core technical countermeasures: 1. Mechanical verification: Calculate the thickness of the panels and the density of attachment points based on the local wind pressure value for a once-in-50-years event (e.g., ≥1.5 kN/㎡). 2. Enhanced anchorage: Use a combination of back bolts and mechanical hangers for dual fixation (at least 6 attachment points per panel). 3. Wind tunnel depressurization design: Install hidden air channels within the panel joints to balance internal and external air pressure. The team includes structural engineers who can provide wind pressure calculation reports and seismic resistance reports.

Q:How can installations be made without demolishing old walls during the renovation of existing buildings?

A:Innovative solutions: • Dry construction method: New base layer constructed using light steel keel framework (80-150mm away from the original wall) to avoid issues related to the flatness of the old walls; • Non-destructive anchoring: Use of chemical anchors to penetrate the insulation layer and reach the structural layer, preventing vibration-induced cracking; • Quick plug-and-play system: Pre-installed clips on panels increase on-site assembly efficiency by 50%. Successfully completed 17 renovation projects, with the fastest completion time being 15 days for a 1000 square meter project.

Q:How to prevent condensation on aluminum composite panels alucobond due to cold bridging in cold regions?

A:Custom thermal break technology: Technical solutions 1. Thermal break profile system → The profiles incorporate PA66 nylon thermal break strips with a thermal conductivity of ≤0.3 W/(m·K). 2. Layered sealing structure → Closed-cell foam rods are filled within the panel joints, covered externally by elastic sealant. 3. Condensate drainage → Water channels are set on the back of the profiles, connecting to vertical drainage ducts. * Can provide thermal simulation reports and dedicated accessory packages for projects below -30°C.

About Project Technical Consultancy Solutions-aluminum composite panel-aluminum facade panel-aluminum baffle ceiling

Ngeunaan Project Téknis Consultancy Leyuran

Proyék & Rojongan Téknis Kontak Ayeuna

1.Palayanan

1.1 Solusi proyék

Supplier ngagaduhan kamampuan pikeun ngalayanan proyék rékayasa para pembeli profésional, sapertos kontraktor atanapi perusahaan desain

1.2 Kamampuh desain proyék

Supplier tiasa nyayogikeun jasa desain 2D sareng 3D pikeun pembeli rékayasa

1.3 Pamasangan dina situs

Panyadia tiasa nyayogikeun jasa turutan dina situs pikeun para pembeli rékayasa

1.4 Pangrojong téknis dina situs

supplier nu bisa dispatch insinyur pikeun rojongan jasa lokal

1.5 Pangadaan one-stop

Supplier tiasa nyayogikeun jasa desain portopolio produk multi-kategori

2.Kontrol kualitas

2.1 Garansi sadia

Panyadia nyayogikeun jasa jaminan kualitas

2.2 Kualitas traceability

Ngarojong pembeli dina traceability kualitas

2.3 Instrumén tés

Jumlah unit alat uji produk supplier

2.4 Inspeksi bahan dina situs

Panyadia gaduh prosés pamariksaan anu relevan pikeun bahan baku produk ieu

2.5 Idéntifikasi traceability bahan baku

Ngarojong pembeli dina traceability kualitas

2.6 Inspeksi produk réngsé

Supplier ngalaksanakeun pamariksaan anu ketat dina sadaya produk réngsé

2.7 Inspektur QA/QC

Jumlah karyawan inspeksi QA / QC supplier

3.Sertifikasi

Sertipikat ISO9001

SGS bijil

Sertifikasi FR SGS

Naha anjeun hoyong ningali finish ieu dilarapkeun dina fasad?

Aksés ka simulator fasad urang

Atawa Inspirasi Réngsé proyék?

Milarian Proiect & Aplikasi

News patali

Mar. 02, 2026

JIASHUNCAI Aluminum Composite Panel Factory Officially Resumes Production for the New Year

At the beginning of the new year, JIASHUNCAI Aluminum Composite Panel Factory officially resumed full operations, marking a fresh start filled with confidence and commitment to global partners. Founded in 2003, JIASHUNCAI continues to move forward with stable production capacity and professional ACP manufacturing experience.

Tempo deui

Jan. 30, 2026

Comprehensive Guide to Aluminium Composite Panel Board Applications and Benefits

Aluminium Composite Panel (ACP) boards have become a mainstay in modern architecture and construction, valued for their versatility, durability, and aesthetic appeal. This article will delve into the world of ACPs, covering their composition, advantages, applications, and considerations when choosing the right panel for your project. We’ll explore why JSC Aluminum is a trusted supplier of high-quality ACP solutions. Understanding ACPs is crucial for architects, contractors, and anyone involved in building projects. An aluminium composite panel board is a multi-layered material consisting of two thin aluminium sheets bonded to a non-aluminium core. The core materials commonly used include polyethylene (PE), fire-retardant (FR) polyethylene, or mineral filled cores. This construction provides exceptional strength, rigidity, and a lightweight solution compared to solid aluminium panels. ACPs are available in a vast range of colours, finishes (including wood, stone, and metallic effects), and thicknesses, making them adaptable to various design requirements.

Tempo deui

09 Oktober 2025

Aluminium adul Panels Lightweight

Aluminium Facade Panels geus ngartikeun ulang arsitéktur modern ku ngagabungkeun efisiensi lightweight kalawan kinerja luar biasa-fitur nu geus nyieun eta pilihan luhur pikeun pembina, arsiték, sarta désainer sakuliah dunya.

Tempo deui

19 Juli 2025

"Program Ganjaran Nol Cacat" Jiashuncai ngahubungkeun insentif tim langsung kana hasil anjeun

(Sareng Kunaon 99.2% Pass Rate Kami Ngahémat Waktos & Duit Anjeun) Kumaha Tim Jiashuncai Ngawangun Panel Aluminium Anu Sampurna

Tempo deui

28 Oktober 2025

Pe Acp Lightweight Bangun

Pe Acp (Poliétilén Aluminium Composite Panel) geus mecenghul salaku solusi transformative dina

Tempo deui

Located in eastern Africa.The two containers filled with ACP panels purchased by customers from Tanzania at our factory have arrived and are currently being unloaded.

07 Juli 2025

Lokasina di wétan Africa.The dua peti ngeusi panels ACP dibeuli ku konsumén ti Tanzania di pabrik urang geus anjog sarta ayeuna keur unloaded.

Angkutan antar benua nyandak satengah bulan, sareng tungtungna, dua wadah anu ngeusi panél ACP anu dipésér ku palanggan kami di Tanzania, anu aya di Afrika wétan, parantos sumping. Aranjeunna ayeuna keur dibongkar.

Tempo deui

	Machining of panels komposit
	Panel komposit aluminium tiasa didamel nganggo mesin CNC
	atanapi sacara manual nganggo ragaji témbok atanapi router portabel.
	Salaku tambahan, éta ngamungkinkeun adaptasi kana rupa-rupa aplikasi anu sanés. Kantor téknis nganggo program khusus pikeun ngaminimalkeun runtah bahan salami mesin bagian, ngirangan cut-off sareng runtah.
	Metoda ieu ngamungkinkeun pangukuran anu tepat sareng gampang dibentuk pikeun pamasangan dina facades, ngagunakeun rupa-rupa sistem perakitan anu disertipikasi sareng fixings anu katingali atanapi disumputkeun.

Sikian Kayu	Eunteung	Gloss Luhur	Metalik
Warna Padet	Semprot Lukisan	Marmer	Disikat

Lebar	1220mm, 1250mm, 1500mm
Panjangna	2440mm, 3050mm, 4050mm, 5000mm
Ketebalan Panel	2mm, 3mm, 4mm, 5mm, 6mm atanapi ngaropéa
Alu.Kandel Kulit	0.08mm, 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm atawa ngaropéa
Ukuran Standar	1220mm x 2440mm (4' x 8')
Lain	Narima ukuran custom ogé

Lebar	1220mm, 1250mm, 1500mm
Panjangna	Kana pamundut, tapi preferably <5800mm
Ketebalan Panel	2mm ~ 6mm
Alu.Kandel Kulit	0.21mm~0.50mm: 0.21mm, 0.30mm, 0.40mm, 0.50mm
Ukuran Standar	1220mm x 2440mm (4' x 8'); 1500mm x 3050mm (5' x 10')
Warna-warna	standar pabrik urang 45 kelir pikeun rujukan
Lain	Nampa ukuran sareng warna khusus ogé

No.	Cina	Jérman	AS	Perancis	Inggris
No.	GB / T8627	DIN 4102	ASTM E84	NFF16-101	BS-476
1	A1, A2	A1, A2	NC	Pikeun	O
2	B1	B1	A	M1, M2	1
3	B2	B2	B, C	M3	2, 3

Ngeunaan JiaShunCai Composite Panels

Naha Paké Aluminium Composite Panel

Kasalametan seuneu (FR B1 A2) ACP

ACP anodized

ACP PE

PVDF ACP

Gampang ngolah ACP

Unbreakable Core ACP

Prosés Urutan Téknik 15-Lengkah

	Punching jeung paeh motong tina panel komposit
	Panel komposit aluminium bisa ditinju jeung paeh-cut ngagunakeun mesin CNC pikeun adaptasi desain pikeun kaperluan proyék husus, mastikeun finish beresih jeung tepat. Kami nawiskeun rupa-rupa bentuk sareng pola perforasi, kalebet kamampuan pikeun ngahasilkeun gambar lengkep sapertos awan titik, ngamungkinkeun pikeun nyiptakeun desain anu rumit ngaliwatan téknik punching anu rupa-rupa.

	Edges panel komposit
	Tepi na nutupan inti panel, ngajagi tina cuaca sareng ningkatkeun penampilan profésional anu bersih sareng profésional. Kami nawiskeun tilu jinis edges: tunggal (nyumputkeun ujung), interior ganda (nyumputkeun ujung sareng bagian tina raray pungkur), sareng exterior ganda (nyumputkeun ujung sareng ngalegaan tab pikeun nyumputkeun sendi sareng lambaran panel anu sanés).

	Panel komposit melengkung
	Bending bisa lumangsung dina arah kerung atawa gilig, boh vertikal atawa horisontal, sarta bisa dilarapkeun ka potongan kalawan atawa tanpa tab, cocog pikeun duanana sistem instalasi katempo jeung disumputkeun.

	Ngabentuk
	Prosés ieu tiasa dilaksanakeun boh di bengkel atanapi di tempat, salawasna dina lingkungan anu bersih, ditangtayungan khusus, sareng diadaptasi. Wangun kaset teu diwatesan ku bentuk rectangular tradisional; aranjeunna ogé bisa dirancang dina wangun 3D.

Gelar	Barang	Gelar	Barang
A	Euweuh-durukan	B1	Teuas-durukan
B2	Pangdurukan	B3	Bisa kaduruk
Gelar	Bahan	Indikator Performance durukan
Euweuh-durukan	Bahan Kelas A	Numutkeun uji GB / T8625, panjang rata-rata sésana≤35cm (kaasup naon waé residual specimen length≥20cm) pikeun tiap tés sareng rata-rata suhu gas flue peak≤150 ℃, teu aya spesimen deui burner adegan; Numutkeun uji GB / T8627, tingkat dénsitas haseup (SDR) ≤15; Numutkeun kana uji GB / T14002 sareng GB / T14403, nilai kalorina≤4.2MJ / kg, sareng émisi termal specimen per unit area≤16.8MJ / m2; Bahan karacunan durukan gas flu tina sakabéh konsentrasi non-bisa nepi ka tiwasna ≥25 mg/L.
Teuas-durukan	Matéri Kelas B1	Numutkeun uji GB / T8626, sipat durukan na kudu patepung GB / T8626, sarta teu ngidinan sagala muterna durukan ngaduruk kertas filter; Numutkeun uji GB / T8625, rata-rata unggal specimen sésana length≥15cm (kaasup sagala residual specimen length≥0cm), sarta rata suhu puncak gas≤200 ℃ dina unggal test. Numutkeun uji GB / T8627, tingkat dénsitas haseup (SDR) ≤75.

No.	Item tés	Métode Tés	Indéks Téknis	Hasilna
1	Nilai minimum sésana panjang sanggeus ngaduruk (mm)	GB / T8625-88	> 0	480
2	Nilai rata-rata sésana panjang saatos ngaduruk (mm)	GB / T8625-88	≥ 150	160
3	Suhu haseup (℃)	GB / T8625-88	≤ 200	78
4	Jangkungna seuneu (mm)	GB / T8625-88	≤150	12
5	Kelas dénsitas haseup	GB / T8627-88	<75	9

Kandelna	± 0,20 mm
ketebalan aluminium	± 0,02 mm
Lebar	± 2,0 mm
Panjangna	± 3,0 mm
diagonal	± 5,0 mm
Ékspansi termal	2,40 mm / m @ 100 ℃ bédana Temp

Karasa Pensil	> HB
Résistansi Suhu	-40 ℃ ~ 80 ℃
Kakuatan Dampak	50 kg cm2
Résistansi Cai ngagolak	Kulub salila 2 jam tanpa robah
Résistansi asam	Lebetkeun permukaan dina 5% HCl salami 24 jam tanpa robih
Résistansi alkali	Lebetkeun permukaan dina 5% NaOH salami 24 jam tanpa robih
Résistansi Minyak	Neuleumkeun permukaan dina 20 # oli mesin salila 24 jam tanpa robah
Résistansi pangleyur	Dibersihkeun 100 kali nganggo Dimethylbenzene tanpa parobahan
Résistansi beberesih	> 1000 kali tanpa robah
Kakuatan mesek 180 °	> 5 N/mm
Résistansi tiis	-40 ℃

Item nguji	Standar	Hasilna
Unit Beurat	ASTM D792	T4mm = 5,5 kg/m²
Ékspansi termal	ASTM D696	24-28
Suhu deformasi termal	ASTM D648	115 ℃
Konduksi termal	ASTM D976	0,102 kcal/m.hr ℃
Résistansi Dampak	ASTM D732	1,640 kgf
Kakuatan napel	ASTM D903	0,77 kg/mm
Élastisitas Flexural	ASTM D790	4030 kg/mm²
Résistansi geser	ASTM D732	2,7 kgf/mm²
Résistansi angin-tekanan	ASTM E330	LULUS
Sipat Ngalawan Cai	ASTM E331	LULUS

Jenis Bahan	Logika Itungan	Kahariwang klien Int'l
Panels Utama	Wewengkon unfolded + 8% runtah	Konsistensi bets warna
Asesoris Kit	propil ningkatna / segel @ 1: 1.2	Kelas anti korosi (C5-M)
Bungkusan	Pembagi honeycomb + panghalang lembab	Kontrol kalembaban angkutan laut

spésifikasi produk	Jelaskeun
Pamakéan produk	Non-kaduruk, cocog pikeun aplikasi éksternal.
Bahan	Dijieunna tina alloy aluminium sapertos 5052, 3003, sareng 1100.
Paripolah seuneu	Kasalametan seuneu A2 (EN 13501-1: 2018).
Ukuran Standar	Ukuran sadia: 1250x2500 mm sarta 1550x3200 mm.
Lebar baku	lebar baku: 1250 mm atawa 1550 mm.
Panjangna	Panjang maksimum: 6000 mm.
Total Kandel	Ketebalan biasa: 4,0 mm (sadia dina 2,5-6,0 méter).
Kandel Aluminium Top	0,5 milimeter ka 0,7 milimeter
Beurat	Beurat: 4,54 kg / méter pasagi (pikeun ketebalan 4,0 mm).
Perlakuan permukaan	Permukaan rengse: PVDF, FEVE, anodized, kelir spéktral.
PVDF / FEVE Warna	warna murni, kelir logam, nada kai, nada batu, finish brushed.
ngajamin	Garansi: 15 taun.
Suhu lumaku	Rentang suhu: -40°C nepi ka 80°C.
Non-combustibility Test	Standar: AS 1530.1/BS467/EN13501/ASTM E84.
Bungkusan	Pallets kai, 8 pallets per wadahna 20GP, 16 pallets per wadahna 40GP.