Q:How to avoid burrs and coating cracking when cutting aluminum composite panels alucobond?

A:Key processing technologies and equipment: • Tool selection: ◦ For the front side of the plate: use a diamond saw blade (with at least 120 teeth, rotating at 3000 rpm) to cut against the direction of the plate surface; ◦ For the back side of the plate: switch to a high-speed steel scraper to prevent aluminum skin curling. • Process control: ◦ Remove the protective film before cutting (to avoid melting and sticking); ◦ Feed rate ≤ 2 m/min, use air cooling to reduce thermal damage. Note: Absolutely do not use a grinding wheel cutter — it will definitely cause carbonization of the PVDF coating.

Q:How can the machining accuracy of shaped panels (curved surfaces/corner angles) be ensured?

A:Three-step high-precision processing procedure: 1. Digital modeling: ◦ Obtain building surface data through 3D scanning → Generate CNC machining code (error ≤ 0.1mm); 2. Numerical control shaping: ◦ Surface: Mold forming using multi-point vacuum thermoforming machine (heated to 140℃ ± 5℃); ◦ Angles: Use hydraulic bending machine (pressure 80-100 tons) with polyurethane mold; 3. Stress relief: ◦ After molding, keep at constant temperature of 25℃ for 24 hours to eliminate internal stress deformation.

Q:What are the technical specifications for the depth and position of edge grooves used for concealed hangers?

A:Parameter 1: Slot depth, requirement: ≤1/2 thickness of aluminum sheet (usually 0.3-0.5mm), inspection tool: laser thickness gauge. Parameter 2: Slot edge distance, requirement: ≥15mm (from the edge of the plate), inspection tool: digital vernier caliper. Parameter 3: Slot bottom fillet, requirement: R≥0.8mm (to prevent stress concentration), inspection tool: radius gauge.Must meet three-way safety standards, warning: excessive slotting can reduce the tensile strength of aluminum by 40%!

Q:Why is it necessary to add reinforcement to the back of large-sized aluminum plastic panels (≥3m)? How is it done?

A:Reason: To prevent wind-induced surface vibration deformation (deflection value must be ≤ L/180). Reinforcement process: 1. Material: Aluminum alloy T-shaped keel (thickness ≥ 2.0 mm); 2. Adhesion: Apply two-component epoxy structural adhesive (shear strength ≥ 8 MPa); After pressing, apply 0.5 kg/cm² weight for curing for 24 hours; 3. Positioning: Rib spacing ≤ 600 mm, distance from edge ≤ 150 mm.

Q:How to protect processed panels for durability?

A:Three critical protective treatments: Protective process: 1. Edge sealing → Apply **epoxy edge sealant** (covers aluminum core, prevents moisture penetration) 2. Groove reinforcement → Inject **polyurethane elastomer** (fills micro-cracks, enhances groove toughness) 3. Backside corrosion protection → Spray **zinc-chromium coating** (salt spray test ≥ 1000 hours) *Acceptance criteria: edge seal layer thickness ≥ 0.2mm, no missed areas/bubbles (detected by UV leak detector).* Technical extension: • Advantages of digital processing: ◦ Laser cutting precision: ±0.05mm (traditional mechanical cutting ±0.5mm); ◦ CNC grooving speed: 30 meters per minute (manual tools 3 meters per minute); • Special processes: ◦ Perforation of light-transmitting panels: waterjet cutting (hole diameter ≥3mm, density ≤15%); ◦ Stone-like effect: surface embossing + UV printing (weather resistance grade ≥8). Free sample processing provided → Verify process compatibility!

Mo te Paewhiri Tukatuka-konumohe papa hiato-konumohe wharangi papa-konumohe tuanui parapara

Mo te Tukatuka Paewhiri

Kaupapa & Tautoko Hangarau Whakapa atu inaianei

Mena ka hapa koe i nga taputapu e hiahiatia ana, ka taea e to maatau pokapū whakaputa te mahi miihini, te pupuhi, te tapahi mate, te tarai, te tapa, te piko, me te hanga mahi mo to kaupapa.

He mihi ki nga hangarau matatau, ka taea inaianei te hanga ahua 3D, te awhina, me te raweke i te rama ki runga i te mata o te whare, e taea ai te hanga i tetahi ahua motuhake me te ahurei.

Ka mahi tahi te Tari Hangarau a JiaShunCai me nga kaitoi, nga kaihoahoa, me nga kaiwhakauru kia mohio ai koe ki nga kaupapa tino pai rawa atu. Ka ora tonu o whakaaro.

Ko nga whiringa kanorau e waatea ana na roto i nga mahi miihini me te whakarereketanga o nga panui hiato konumohe ka taea te hanga i nga papanga me te kaha hoahoa kore mutunga.

	Te miihini o nga panui hiato
	Ka taea te mahi miihini konumohe ma te whakamahi i nga miihini CNC
	ā-ringa rānei me te kani pakitara, te pouara kawe ranei.
	I tua atu, ka taea e ia te urutau ki te whānuitanga o etahi atu tono. Ka whakamahia e te tari hangarau etahi kaupapa motuhake hei whakaiti i nga ururua rawa i te wa e mahi ana etahi waahanga, te whakaiti i nga tapahi me nga ururua.
	Ma tenei tikanga ka taea te inenga tika me te hanga ngawari mo te whakaurunga ki runga i nga mata, ma te whakamahi i nga momo punaha huihuinga whaimana me nga taapiri kitea, huna ranei.

Panuku papa hiato

Ka taea te hanga i nga panui hiato ma te whakamahi i nga miihini CNC, ka taea te taapiri i te whakamaarama me te hohonu, e whakanui ana i to raatau tirohanga. Ka taea te whakatutuki i nga momo hoahoa, tauira, rahi me nga ahua i runga i nga taputapu e whakamahia ana. Ko nga tauira ritenga, nga kakano, me nga hoahoa ka taea te ta ki te hanga i te ahua rerehua mo te hanga whare. Ka whakamahia ano hoki enei panui ki nga mea whakapaipai mo roto me waho, penei i nga tohu, tohu, kara, pakitara wehewehe, me nga huānga tuanui tauira, te taapiri i te ahua me te maamaa ki nga waahi.

	Te wero me te tapahi mate o te papa hiato
	Ka taea te werohia me te tapahi i nga panui konumohe ma te whakamahi i nga miihini CNC ki te urutau i nga hoahoa ki nga hiahia kaupapa motuhake, me te whakarite i te ma me te tino tika. Ka whakaekea e matou nga momo ahua me nga tauira kowhatu, tae atu ki te kaha ki te whakaputa i nga whakaahua katoa penei i nga kapua tohu, e taea ai te hanga i nga hoahoa uaua ma nga momo momo whiu.

	Nga tapa papa hiato
	Ko te taha o te taha e mau ana i te matua o te panui, hei whakamarumaru mai i te huarere me te whakanui ake i te ma, te ahua ngaio o te mata. Ka tukuna e matou nga momo tapa e toru: kotahi (huna i te taha), takirua o roto (huna i te taha me tetahi waahanga o te mata o muri), me te rua o waho (huna te tapa me te toro atu i te ripa hei huna i nga hononga ki etahi atu pepa panui).

	Paewhiri hiato kopikopiko
	Ka taea te piko ki roto i nga ahunga concave, convex ranei, poutū, whakapae ranei, a ka taea te tono ki nga kongakonga me nga ripa kore ranei, e tika ana mo nga punaha whakaurunga kitea me te huna.

	Te hanga
	Ka taea te whakahaere i tenei mahi i roto i te awheawhe, i runga ranei i te waahi, i nga wa katoa i roto i te waahi ma, kua tino tiakina, kua urutau. Ko nga ahua o nga rīpene kaore i te herea ki nga momo tapawha tawhito; ka taea hoki te hoahoa ki nga ahua 3D.

Kei te pirangi koe ki te kite i tenei whakaotinga e whakamahia ana ki runga i te mata?

Te uru ki ta maatau simulator facade

He kaupapa kua oti ranei te Inspiration?

Rapua he Proiect & Taupānga

Nga korero e pa ana

Aluminum Composite Panel: The Ideal Choice for Modern Architecture

Hepetema 05, 2025

Paewhiri Hiato Aluminium: Ko te Kowhiringa Pai mo te Hangahanga Hou

Kei te rapu koe mo tetahi taonga hanga whare tino pai, roa, me te ataahua? Titiro kore fu

Tiro atu

In celebration of Women's Day, JiaShunCai extends warm greetings to its female employees and distributes festival gifts.

Maehe 08, 2025

Hei whakanui i te Ra Wahine, ka mihi a JiaShunCai ki ana kaimahi wahine me te tohatoha i nga koha hakari.

Ko te Ra Wahine o te Ao, ka whakanuia i te 8 o Poutu-te-rangi ia tau, he ra hei whakanui i nga whakatutukitanga hapori.ohanga, tikanga, torangapu a nga wahine huri noa i te ao. He ra hoki tenei ki te tautoko i te riterite o te ira tangata me te tika o nga wahine.

Tiro atu

Hepetema 01, 2025

TE PAHI WHAKAARO ALUMINIMA I TE WHAKAMAHI O TE WHAKAMAHI

I roto i te ao hurihuri tere o te hoahoa hoahoanga, kua puta mai te papanga konumohe konumohe tetahi o nga otinga tino auaha me te whai kiko.

Tiro atu

Dec. 07, 2025

How to Cut and Shape ACP PE Sheets

ACP PE sheets (Aluminum Composite Panels with PE core), also known as pe aluminium composite pa

Tiro atu

Dec. 07, 2025

The Benefits of PVDF ACP in Modern Architecture

In modern architecture, where durability, aesthetics, and sustainability converge, pvdf acp (Po

Tiro atu

Oketopa 09, 2025

Ko te tuanui o te tuanui tuanui ngawari te whakauru

Ko nga papanga tuanui konumohe kua riro hei putunga i roto i te hoahoa o roto o te ao hou me te hanganga, he whakawhetai ki a raatau, he uaua te ahua, me te whakaurunga tino-ngawari.

Tiro atu

Rakau Rakau	Whakaata	Moananui Teitei	Maama
Tae Mārō	Repuhia te peita	Mapere	Kua paraitia

Whānui	1220mm, 1250mm, 1500mm
Te roa	2440mm, 3050mm, 4050mm, 5000mm
Paewhiri Matotoru	2mm, 3mm, 4mm, 5mm, 6mm kua whakaritea ranei
Alu.Skin Thickness	0.08mm, 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm kua whakaritea ranei
Rahi Paerewa	1220mm x 2440mm (4' x 8')
Ko etahi atu	Whakaaetia te rahi ritenga hoki

Whānui	1220mm, 1250mm, 1500mm
Te roa	I runga i te tono, engari he pai ake <5800mm
Paewhiri Matotoru	2mm~ 6mm
Alu.Skin Thickness	0.21mm~0.50mm: 0.21mm, 0.30mm, 0.40mm, 0.50mm
Rahi Paerewa	1220mm x 2440mm (4' x 8'); 1500mm x 3050mm (5' x 10')
Nga Tae	45 nga tae o te wheketere mo te tohutoro
Ko etahi atu	Whakaaetia te rahi me nga tae

Kao.	Haina	Tiamana	USA	Parani	UK
Kao.	GB/T8627	DIN 4102	ASTM E84	NFF16-101	BS-476
1	A1, A2	A1, A2	NC	MO	O
2	B1	B1	A	M1, M2	1
3	B2	B2	B, C	M3	2, 3

Tohu	Tūemi	Tohu	Tūemi
A	Kore-tahu	B1	Maama-tahu
B2	Ngahurutanga	B3	Ka tahuna
Tohu	Rauemi	Ko nga Tohu Mahi Whakawera
Kore-tahu	Rauemi akomanga A	E ai ki te whakamātautau GB/T8625, te roa toharite o te toenga≤35cm (tae atu ki tetahi tauira toenga roa≥20cm) mo ia whakamātautau me te toharite hau rewharewha pāmahana peak≤150℃, kahore tauira hoki mura ahi te scene; E ai ki te whakamatautau GB / T8627, o ratou taumata paowa paowa (SDR) ≤15; E ai ki te whakamatautau GB / T14002 me GB / T14403, tona uara calorific≤4.2MJ/kg, me te tauira waiariki tukunga mo ia wae area≤16.8MJ/m2; Ko nga mea paitini ka wera i te hau rewharewha o te kukū kore whakamate katoa o≥25 mg/L.
Maama-tahu	Rauemi o te akomanga B1	E ai ki te whakamatautau GB/T8626, me tutuki ona ahuatanga ngingiha ki te GB/T8626, kaua hoki e tukua kia tahuna te pepa tātari; E ai ki te whakamatautau GB/T8625, ko te toharite o ia tauira e toe ana te roa≥15cm (tae atu ki nga toenga tauira roa≥0cm), me te pāmahana teitei toharite o te hau≤200℃ i ia whakamatautau. E ai ki te whakamatautau GB/T8627, o ratou taumata kiato auahi (SDR)≤75.

Mo JiaShunCai Composite Panels

He aha te whakamahi i te Paewhiri Hiato Aluminium

Te haumaru ahi (FR B1 A2) ACP

ACP Anodised

ACP PE

PVDF ACP

He ngawari ki te tukatuka ACP

ACP Kore e taea te pakaru

Te 15-Step Engineering Order Process

Kao.	Tūemi Whakamātautau	Tikanga Whakamatau	Taurangi Hangarau	Hua
1	Te uara iti o te roa e toe ana i muri i te wera (mm)	GB/T8625-88	> 0	480
2	Uara Toharite o te roa e toe ana i muri i te weranga (mm)	GB/T8625-88	≥ 150	160
3	Te pāmahana o te auahi (℃)	GB/T8625-88	≤ 200	78
4	Teitei o te ahi (mm)	GB/T8625-88	≤150	12
5	Koeke o te kiato auahi	GB/T8627-88	< 75	9

Mātotoru	±0.20 mm
Konumohe matotoru	±0.02 mm
Whānui	±2.0 mm
Te roa	±3.0 mm
Hauroki	±5.0 mm
Te Roha Ngawha	2.40 mm/m@100 ℃ rerekētanga Temp

Pencil Hardness	> HB
Paemahana Ātete	-40℃~80℃
Te Kaha Paanga	50 kg cm2
Atete Wai Kohua	Kohuatia mo te 2 haora kaore he huringa
Ātete Waikawa	Rukuhia te mata ki te 5% HCl mo te 24 haora kaore he huringa
Ātete Alkali	Rukuhia te mata ki te 5% NaOH mo nga haora 24 kaore he huringa
Atete hinu	Rukuhia te mata ki te hinu miihini 20# mo te 24 haora kaore he huringa
Wairewa Ātete	Ka horoia nga wa 100 ki te Dimethylbenzene kaore he huringa
Horoi Atete	> 1000 nga wa kaore he huringa
Te kaha kiri 180°	>5 N/mm
Ātete Matao	-40 ℃

Tūemi Whakamātautau	Paerewa	Hua
Taumaha Waeine	ASTM D792	T4mm=5.5kg/m²
Te Roha Ngawha	ASTM D696	24-28
Te Weahanga Huringa Ngaaahu	ASTM D648	115℃
Kawenga Ngawha	ASTM D976	0.102kcal/m.hr ℃
Atete Paanga	ASTM D732	1.640kgf
Te Kaha Whakapiri	ASTM D903	0.77kg/mm
Te Elasticity	ASTM D790	4030kg/mm²
Ātete Kutikuti	ASTM D732	2.7 kgf/mm²
Ātete hau-pēhanga	ASTM E330	KUA
Nga Taonga ki te Wai	ASTM E331	KUA

Momo Rawa	Aratau Tatau	Nga Awangawanga Kiritaki Int'l
Paewhiri Matua	Te waahi tuwhera + 8% moumou	Te riterite o te puranga tae
Kete taputapu	Te whakairi i nga korero / hiri @ 1:1.2	Koeke aukati-waikura (C5-M)
Te takai	Nga wehewehe honikoma + arai makuku	Te whakahaere i te haumuku o nga waka moana

Nga whakaritenga hua	Whakaahuatia
Whakamahi Hua	Kaore e mura, e tika ana mo nga tono o waho.
Rauemi	He mea hanga mai i nga koranu konumohe penei i te 5052, 3003, me te 1100.
Whanonga Ahi	A2 haumaru ahi (EN 13501-1:2018).
Ahu Paerewa	Rahi e wātea ana: 1250x2500 mm me 1550x3200 mm.
Whānui Paerewa	Te whanui paerewa: 1250 mm, 1550 mm ranei.
Te roa	Te roa teitei: 6000 mm.
Te Matotoru Tapeke	Te matotoru auau: 4.0 mm (e waatea ana i te 2.5-6.0 mita).
Runga Konumohe Matotoru	0.5 millimeters ki te 0.7 millimeters
Taumaha	Taumaha: 4.54 kg/mita tapawha (mo te 4.0 mm te matotoru).
Maimoatanga Mata	Ka mutu te mata: PVDF, FEVE, anodized, tae matakite.
PVDF/FEVE Tae	tae parakore, tae konganuku, oro rakau, oro kohatu, mutu paraihe.
Taurangi	Pūtāhui: 15 tau.
Te Paemahana e tika ana	Awhe pāmahana: -40°C ki te 80°C.
Whakamātautau-kore	Paerewa: AS 1530.1/BS467/EN13501/ASTM E84.
Te takai	Palleti rakau, 8 pallets ia ipu 20GP, 16 pallets ia ipu 40GP.