Q:How to visit our factory?

A: Jiashuncai : Block 2, No. 6, Huxi Road, Xinan Street, Sanshui District,Foshan City, Guangdong Province, China

Q:Is your company a manufacturer or a trader?

A: We are professional manufacturers of aluminum plastic panels, with 23 years of production experience. Our factory is located in Foshan City, China, covering an area of 30,000 square meters, with an annual production capacity of 5 million square meters. We directly control the entire process from raw material procurement to finished product delivery, ensuring stable product quality.

Q:What qualifications and certifications does your company have?

A:We have obtained ISO 9001 certification for quality management systems, international fire resistance ratings, and ISO 14001 certification for environmental management systems. We strictly adhere to the national standards GB/T 17748-2016 (Aluminum Composite Panels for Building Curtain Walls) and GB/T 22412-2016 (Aluminum Composite Panels for General Decorative Use). Additionally, our products meet the requirements of international certifications such as EU RoHS, REACH, and US UL (see the 'Certifications and Downloads' section for details).

Q:What are the main structure and technical parameters of aluminum Composite panels?

A:Our aluminum Composite panels feature a three-layer composite structure: upper and lower layers consist of 0.5-0.8mm thick aluminum alloy panels (either pure 1100 aluminum or 3003 aluminum alloy), while the middle layer comprises high-pressure low-density polyethylene (PE) core material. The surface treatment includes fluorocarbon coating (PVDF) with an ultraviolet blockage rate exceeding 95%.

Q: Compared to aluminum panels, what advantages does aluminum Composite board have?

A: Compared to aluminum panels, aluminum plastic panels have the following advantages: Cost advantage: The price is about 30% lower than that of aluminum panels of the same specification. Lightweight: It weighs only 2/3 of aluminum panels, reducing building load.

服務-鋁塑板

關於專案技術諮詢解決方案

特色產品

我們提供
高品質產品

看更多

專案解決方案

為承包商和設計公司等買家提供服務。我們也可以派遣工程師提供現場服務協助。

Read More About aluminum drop ceiling grid

專案解決方案

Read More About aluminium panel facade detail

專案設計能力

Read More About facade aluminium cladding

提供保固

Read More About perforated aluminum facade

一站式採購

材料合格證書及檢測報告

關於我們

為什麼選擇我們

專業精神和經驗
在過去的23年裡，嘉順彩始終緊跟甚至領先於鋁塑板、金屬天花板、帷幕牆及金屬相關生產領域的技術進步。我們的工程團隊從未停止探索更佳的解決方案，力求讓我們的產品更可靠、耐用。我們引進了全自動生產線對位和精密加工設備。

看更多

案件

精彩案例
來自我們公司

看更多

常見問題解答

反思、研究或詢問以解決問題。點此跳轉至更多常見問題解答

Q：附加價值？

A：免費提供：專案可行性分析+同類地區個案研究。
Q：鋁塑板可以安裝在複雜的曲面立面上嗎？如何保證精度？

A：可客製化實施方案，技術方案包括：• 三維雷射掃描+BIM建模：精準取得牆面數據，預製異形面板；• 可調式過渡系統：採用通用角碼和三維可調桁架，可進行±15mm的校正；• 分段式緊密配合製程：將曲面分解為多個線性平面，最大限度地減少擬合。我們提供現場勘測及曲面深化設計服務。
Q：超高層建築如何解決鋁塑板alucobond的抗風壓問題？

A：核心技術對策：1. 力學驗證：根據當地50年一遇的風壓值（例如≥1.5 kN/m²）計算面板厚度及連接點密度。 2. 加強錨定：採用背栓與機械吊架組合進行雙重固定（每塊面板至少6個連接點）。 3. 風洞減壓設計：在面板接縫處設置隱藏的風道，平衡內外氣壓。團隊包含結構工程師，可提供風壓計算報告和抗震報告。
問：現有建築改造時，如何在不拆除舊牆的情況下進行安裝？

A：創新方案：• 乾式施工：採用輕鋼龍骨框架砌築新基層（距原牆體80-150mm），避免舊牆平整度問題；• 無損錨固：採用化學錨栓穿透保溫層直達結構層，有效防止振動開裂；• 快速即插即用：面板預裝卡扣，現場組裝效率提升50%。已成功完成17個改造項目，最快1000平米項目僅用15天完成。
Q：在寒冷地區，如何防止鋁塑板alucobond因冷橋而產生結露現象？

A：客製化隔熱技術：技術方案：1. 隔熱型材系統 → 型材採用導熱係數≤0.3 W/(m·K)的PA66尼龍隔熱條。 2. 分層密封結構 → 面板接縫內填充閉孔泡棉棒，外覆彈性密封膠。 3. 冷凝水排放 → 型材背面設有排水通道，並與垂直排水管連接。 * 對於-30°C以下項目，可提供熱模擬報告及專用配件包。

訊息

關於我們公司的最新消息

Apr. 25, 2026

JIASHUNCAI Expands Production Capacity: New ACP Production Line Installed to Meet Growing Global Demand

Increasing Demand Drives Production Expansion With the rapid growth of global demand for Aluminum Composite Panels (ACP), JIASHUNCAI is proud to announce the expansion of its manufacturing capacity. Recently, a new production line has been successfully delivered to our factory and is currently under installation. This upgrade reflects the strong increase in orders from international markets and our commitment to providing fast delivery and stable supply.

看更多

Apr. 10, 2026

Indian Clients Visit Jiashuncai Aluminum Composite Panel Factory for Business Cooperation

Introduction: Strengthening Global Partnerships in ACP Industry Recently, we were honored to welcome clients from India to visit our factory — Jiashuncai Aluminum Composite Panel (ACP) Manufacturer. This visit marks an important step in strengthening international cooperation and reflects the growing demand for high-quality ACP panels in the Indian market. Through face-to-face communication, factory inspection, and technical discussions, both sides gained deeper confidence for future collaboration.

看更多

Mar. 14, 2026

Common Problems in Aluminum Composite Panel Construction and How to Avoid Them

Introduction to Aluminum Composite Panel Installation Aluminum Composite Panels (ACP) are widely used in modern architecture for building facades, curtain walls, signage systems, and interior decoration. Because ACP panels are lightweight, durable, and easy to fabricate, they have become one of the most popular cladding materials in commercial construction projects. However, improper installation or construction mistakes can lead to problems such as panel deformation, poor sealing, surface contamination, and weak bonding. Understanding these issues is essential for contractors, architects, and construction companies working with ACP panels. This article explains the most common aluminum composite panel construction problems and how to prevent them.

看更多